BUZZER: Diagnosis Procedure
- CHECK DTC WITCH AUTOMATIC BACK DOOR CONTROL MODULE
Check that DTC is not detected with automatic back door control module.
Is the inspection result normal?
YES: GO TO 2.
NO: Perform trouble diagnosis relevant to DTC indicated.
- CHECK BACK DOOR WARNING CHIME
Check back door warning chime.
Refer to "DIAGNOSIS PROCEDURE ".
Is the inspection result normal?
YES: GO TO 3.
NO: Repair or replace the malfunctioning parts.
- REPLACE AUTOMATIC BACK DOOR CONTROL MODULE
- Replace automatic back door control module. Refer to "REMOVAL AND INSTALLATION ".
- Confirm the operation after replacement.
Is the result normal?
YES: Inspection End.
NO: Check intermittent incident. Refer to "INTERMITTENT INCIDENT ".