LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2014 >> QX60 Base, FWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Anti-Theft Systems >> Door & Lock (Except Hybrid) >> Ecu Diagnosis Information >> Automatic Back Door Control Unit >> Fail Safe

Fail Safe

Display contents of CONSULT Fail-safe Cancellation
U1000 CAN COMM Inhibit automatic back door operation Return to normal status.
U1010 CONTROL UNIT (CAN) Inhibit automatic back door operation Return to normal status.
B2401 IGN OPEN Inhibit automatic back door operation Automatic back door control module detects ignition switch ON signal via CAN communication.
B2409 HALF LATCH SW Inhibit automatic back door operation Automatic back door control module detects that half latch switch changes from ON to OFF when back door fully closes.
B2416 TOUCH SEN R OPEN Inhibit automatic back door operation Return to normal status.
B2417 TOUCH SEN L OPEN Inhibit automatic back door operation Return to normal status.
B2419 OPEN SW Inhibit automatic back door operation Reconnect battery.
B2420 CLOSE SW Inhibit automatic back door operation Reconnect battery.
B2422 BACK DOOR STATE Inhibit automatic back door operation Half latch switch is ON from OFF.
B2423 ABD MTR TIME OUT Inhibit automatic back door operation At least 180 seconds are passed after automatic back door operation is inhibited.
B2426 SPINDLE SENSOR LH Inhibit automatic back door operation Return to normal status.
B2427 SPINDLE SENSOR RH Inhibit automatic back door operation Return to normal status.
B2428 AUTO BACK DR CNT MODULE Inhibit automatic back door operation Return to normal status.
B242A CLSR CONDITION Inhibit automatic back door operation Reconnect battery.
scientia non olet · About LEMON Manuals