LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2014 >> QX60 Base, FWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Anti-Theft Systems >> Door & Lock (Except Hybrid) >> DTC/Circuit Diagnosis >> Door Switch >> Component Inspection

Component Inspection

  1. CHECK DOOR SWITCH 
    1. Turn ignition switch OFF.
    2. Disconnect malfunctioning door switch connector.
    3. Check continuity between door switch terminals.
      Door switch Condition Continuity
      Terminal
      3 Ground contact is part of the switch. Door switch Pressed No
      Released Yes

      Is the inspection result normal? 

      YES: Inspection End.

      NO: Replace malfunction door switch. Refer to "REMOVAL AND INSTALLATION ".

scientia non olet · About LEMON Manuals