LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2014 >> QX60 Base, FWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Anti-Theft Systems >> Door & Lock (Except Hybrid) >> DTC/Circuit Diagnosis >> Back Door Switch >> Component Inspection

Component Inspection

  1. CHECK BACK DOOR SWITCH 
    1. Turn ignition switch OFF.
    2. Disconnect back door lock assembly connector.
    3. Check continuity between back door lock assembly terminals.
      Back door lock assembly Condition Continuity
      Terminal
      7 8 Door switch Pressed No
      Released Yes

      Is the inspection result normal? 

      YES: Inspection End.

      NO: Replace back door lock assembly. Refer to "DOOR LOCK: REMOVAL AND INSTALLATION ".

scientia non olet · About LEMON Manuals