LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2014 >> QX60 Base, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel (Except Hybrid) >> Unit Disassembly And Assembly >> Center Console Rear Finisher >> Disassembly and Assembly >> Disassembly

Disassembly and Assembly: Disassembly

  1. Remove center console rear finisher by releasing clips and pawls using a suitable tool.
  2. Remove rear center ventilator duct screws (A), then remove the rear center ventilator duct (1).
    Fig 1: Identifying Rear Center Ventilator Duct Screws And Ventilator Duct
    G08856797Courtesy of NISSAN NORTH AMERICA, INC.
  3. Release rear center ventilator grille assembly pawls using a suitable tool and remove.
  4. Remove rear blower control.
  5. Remove center console rear finisher upper bracket screws, then remove the center console rear finisher upper bracket.
  6. Remove center console rear finisher lower bracket screws, then remove the center console rear finisher lower bracket.
  7. Remove power socket. Refer to "REMOVAL AND INSTALLATION ".
  8. Remove AC 120V outlet (if equipped). Refer to "REMOVAL AND INSTALLATION ".
  9. Remove 2nd row heated seat switches (LH/RH).
  10. Remove rear auxiliary input jack (if equipped). Refer to "REMOVAL AND INSTALLATION " (BOSE AUDIO W/NAVI W/O SURROUND) or "REMOVAL AND INSTALLATION " (BOSE AUDIO W/NAVI W/SURROUND).
scientia non olet · About LEMON Manuals