Diagnosis Procedure
- CHECK DOOR SWITCH CIRCUIT
Connect CONSULT and check the BCM input signals. Refer to "COMPONENT FUNCTION CHECK ".
Is the inspection result normal?
YES: GO TO 2.
NO: Repair or replace malfunctioning parts.
- CHECK COMBINATION METER INPUT SIGNAL
Select the "Data Monitor" for the "METER/M&A" and check the "DOOR W/L" monitor value.
"DOOR W/L"
Door open: On
Door closed: Off
Is the inspection result normal?
YES: Replace combination meter. Refer to "REMOVAL AND INSTALLATION ".
NO: Replace BCM. Refer to "REMOVAL AND INSTALLATION ".