LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2014 >> Q50 Base, AWD >> Repair and Diagnosis >> Brakes >> Traction Control >> Brake Control System (With VDC) (Except Hybrid) >> DTC/Circuit Diagnosis >> Parking Brake Switch >> Component Inspection

Component Inspection

  1. CHECK PARKING BRAKE SWITCH 
    1. Turn the ignition switch OFF.
    2. Disconnect parking brake switch harness connector.
    3. Check the continuity between parking brake switch terminal and ground.
      Parking brake switch - Condition Continuity
      Terminal
      1 Ground When parking brake switch is pressed Existed
      When parking brake switch is released Not existed

      Is the inspection result normal? 

      YES: INSPECTION END

      NO: Replace the parking brake switch. Refer to "REMOVAL AND INSTALLATION ".

scientia non olet · About LEMON Manuals