Diagnosis Procedure

CHECK TRUNK LID OPEN SIGNAL CIRCUIT
1. Connect the CONSULT.
2. Check the BCM input signals. Refer to "COMPONENT FUNCTION CHECK ".
  Is the inspection result normal?
  
  YES: GO TO 2.
  
  NO: Repair or replace malfunctioning parts.
CHECK COMBINATION METER INPUT SIGNAL
Select the "Data Monitor" for the "METER/M&A" and check the "TRUNK/GLAS-H" monitor value.

"TRUNK/GLAS-H"

Trunk lid open: On

Trunk lid closed: Off

Is the inspection result normal?

YES: Replace combination meter. Refer to "REMOVAL AND INSTALLATION ".

NO: Replace BCM. Refer to "REMOVAL AND INSTALLATION ".