LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2014 >> Q50 Base, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Meter, Warning Lamp & Indicator (Except Hybrid) >> DTC/Circuit Diagnosis >> Steering Switch Signal B Circuit >> Component Inspection

Component Inspection

  1. CHECK STEERING SWITCH 
    1. Remove steering switch. Refer to "REMOVAL AND INSTALLATION ".
    2. Measure the resistance between the steering switch connector.
      Steering switch Condition Resistance (Approx.) Ω
      Terminal Terminal
      14 17 BACK switch ON 1
      MENU UP switch ON 119 - 123
      MENU DOWN switch ON 315 - 327
      Voice recognition switch ON 709 - 737
      MENU OK switch ON 1983 - 2063
      15 VOL DOWN switch ON 1
      VOL UP switch ON 119 - 123
      TEL switch ON 315 - 327
      Display next switch (RIGHT TRIANGLE) ON 709 - 737
      Display back switch (LEFT TRIANGLE) ON 1983 - 2063
      Fig 1: Measuring Resistance Between Steering Switch Connector Terminals
      G09161387Courtesy of NISSAN NORTH AMERICA, INC.

      Is the inspection result normal? 

      YES: INSPECTION END

      NO: Replace steering switch. Refer to "REMOVAL AND INSTALLATION ".