Component Function Check

CHECK FUNCTION

Select "DOOR LOCK" of "BCM" using CONSULT.
Select "DOOR SW-DR", "DOOR SW-AS", "DOOR SW-RL", "DOOR SW-RR" in "DATA MONITOR" mode.

Check that the function operates normally according to the following conditions.

Monitor item	Condition		Status
DOOR SW-DR	Driver side door	Open	On
DOOR SW-DR	Driver side door	Closed	Off
DOOR SW-AS	Passenger side door	Open	On
DOOR SW-AS	Passenger side door	Closed	Off
DOOR SW-RL	Rear side door LH	Open	On
DOOR SW-RL	Rear side door LH	Closed	Off
DOOR SW-RR	Rear side door RH	Open	On
DOOR SW-RR	Rear side door RH	Closed	Off

Is the inspection result normal?

YES: Door switch is OK.

NO: Refer to "DIAGNOSIS PROCEDURE ".