LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2013 >> JX35 FWD >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Door & Lock >> DTC/Circuit Diagnosis >> Back Door Switch >> Component Function Check

Component Function Check

  1. CHECK FUNCTION 
    1. Select DOOR LOCK of BCM using CONSULT.
    2. Select DOOR SW-BK in DATA MONITOR mode.
    3. Check that the function operates normally according to the following conditions.
      Monitor item Condition Status
      DOOR SW-BK Driver side door Open On
      Closed Off

      Is the inspection result normal? 

      YES: Door switch is OK.

      NO: Refer to "DIAGNOSIS PROCEDURE ".

scientia non olet · About LEMON Manuals