Component Inspection
- CHECK STEERING SWITCH RESISTANCE
Check resistance between the following steering switch terminals.
Terminal Signal name Condition Resistance (Ω) (Approx.) 14 17 Display Depress DISPLAY switch.□ 2023 Back Depress BACK switch. 723 15 Enter Depress ENTER switch. 2023 Menu Up Depress ENTER switch up. Δ 121 Menu Down Depress ENTER switch down. ↓ 321 Is the inspection results normal?
YES: GO TO 2
NO: Replace steering wheel switch. Refer to "REMOVAL AND INSTALLATION ".
- CHECK SPIRAL CABLE
Check continuity between the following spiral cable terminals.
Terminals Continuity 3 24 Yes 4 31 24 33 Is the inspection results normal?
YES: Inspection End.
NO: Replace spiral cable. Refer to "REMOVAL AND INSTALLATION ".