LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2013 >> JX35 FWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Meter, Warning Lamp & Indicator >> DTC/Circuit Diagnosis >> Fuel Level Sensor Signal Circuit >> Component Function Check

Component Function Check

  1. COMBINATION METER INPUT SIGNAL 
    1. Select METER/M&A on CONSULT.
    2. Using FUEL METER of DATA MONITOR, compare the value of DATA MONITOR with fuel gauge pointer of combination meter.
      Fuel gauge pointer Fuel tank volume [L] (Approx.)
      Full 70.6
      3/4 54.1
      1/2 36.4
      1/4 20
      Empty 0.0

      Does the data monitor value approximately match the fuel gauge indication? 

      YES: Inspection End.

      NO: Replace combination meter. Refer to "REMOVAL AND INSTALLATION ".

scientia non olet · About LEMON Manuals