Removal and Installation: Removal
- Remove the instrument side finisher (LH) (1) using a suitable tool.
Courtesy of NISSAN NORTH AMERICA, INC.
- Partially remove the front door welt (LH). Refer to
"BODY SIDE WELT: REMOVAL AND INSTALLATION - FRONT DOOR WELT
".
- Remove the instrument lower panel LH screw.
- Release the clips using a suitable tool, then partially remove the instrument lower panel LH.
- Disconnect the aspirator hose from the instrument lower panel LH.
- Disconnect the harness connectors from the instrument lower panel LH.
- Remove the instrument lower panel LH.