LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2013 >> JX35 FWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel >> Removal And Installation >> Glove Box Assembly >> Removal and Installation >> Removal

Removal and Installation: Removal

  1. Remove the instrument side finisher (RH) using a suitable tool.
  2. Remove the glove box assembly lower screws.
  3. Open the glove box lid, then remove the glove box assembly upper screws.
  4. Disconnect the harness connectors from the glove box assembly, then remove the glove box assembly.
scientia non olet · About LEMON Manuals