REAR DIFFERENTIAL GEAR OIL: R200: Refilling
- Remove filler plug (1). Fill with new gear oil until oil level reaches the specified level near filler plug mounting hole.
Oil grade and viscosity: Refer to "FLUIDS AND LUBRICANTS ".
Oil capacity: Refer to "GENERAL SPECIFICATION ".
- After refilling oil, check oil level. Set a gasket to filler plug, then install it to final drive assembly. Refer to
"M/T: EXPLODED VIEW
" (M/T),
"A/T: EXPLODED VIEW
" (A/T).CAUTION: Never reuse gasket.