LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2013 >> G37 Base >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Meter, Warning Lamp & Indicator (Convertible) >> DTC/Circuit Diagnosis >> Washer Level Switch Signal Circuit >> Diagnosis Procedure

Diagnosis Procedure

  1. CHECK WASHER LEVEL SWITCH SIGNAL CIRCUIT 
    1. Turn ignition switch OFF.
    2. Disconnect combination meter connector and washer level switch connector.
    3. Check continuity between combination meter harness connector terminal and washer level switch harness connector terminal.
      Combination meter Washer level switch Continuity
      Connector Terminal Connector Terminal
      M53 31 E32 1 Existed
    4. Check continuity between combination meter harness connector terminal and ground.
      Combination meter Ground Continuity
      Connector Terminal
      M53 31 Not existed

      Is the inspection result normal? 

      YES: INSPECTION END

      NO: Repair harness or connector.

scientia non olet · About LEMON Manuals