Component Inspection

CHECK INTAKE SENSOR

Turn ignition switch OFF.
Disconnect intake sensor connector.

Check resistance between intake sensor terminals.

Terminal		Condition	Resistance kΩ
Terminal		Temperature °C (°F)	Resistance kΩ
1	2	-15 (5)	12.34
		-10 (14)	9.62
		-5 (23)	7.56
		0 (32)	6.00
		5 (41)	4.80
		10 (50)	3.87
		15 (59)	3.15
		20 (68)	2.57
		25 (77)	2.12
		30 (86)	1.76
		35 (95)	1.47
		40 (104)	1.23
		45 (113)	1.04

Is the inspection result normal?

YES: INSPECTION END

NO: Replace intake sensor.