LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2013 >> FX37 Base, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Transfer Case) >> Unit Removal And Installation >> Transfer Assembly >> VK50VE >> VK50VE: Removal and Installation >> Removal

VK50VE: Removal and Installation: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Remove transmission assembly from the vehicle. Refer to "UNIT REMOVAL AND INSTALLATION ".
  2. Remove transfer air breather hose.
  3. Remove rear engine mounting member and engine mounting insulator with power tool. Refer to "EXPLODED VIEW ".
  4. Support transfer assembly with a jack.
  5. Remove transfer mounting bolts with power tool and separate transfer from transmission.
    CAUTION: Secure transfer assembly and transmission assembly to a jack.
scientia non olet · About LEMON Manuals