LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2013 >> FX37 Base, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Transfer Case) >> Removal And Installation >> AWD Control Unit >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Remove the glove box assembly. Refer to "EXPLODED VIEW ".
  2. Disconnect AWD control unit harness connector.
    Fig 1: Locating AWD Control Unit And Mounting Nuts
    G05218998Courtesy of NISSAN NORTH AMERICA, INC.
  3. Remove AWD control unit (1) mounting nuts.
  4. Remove AWD control unit.
scientia non olet · About LEMON Manuals