LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2013 >> FX37 Base, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Transfer Case) >> Periodic Maintenance >> Transfer Fluid >> VQ37VHR >> VQ37VHR: Inspection >> Fluid Level

Fluid Level

WARNING: This page is about a different variant/trim than selected.
  1. Remove filler plug (1) and gasket. Then check that fluid is filled up from mounting hole for the filler plug.
    CAUTION: Never start engine while checking fluid level.
  2. Set a new gasket onto filler plug, and install it on transfer and tighten to the specified torque. Refer to "VQ37VHR: EXPLODED VIEW ".
    CAUTION: Never reuse gasket.
    Fig 1: Checking Fluid Level From Mounting Hole (VQ37VHR)
    G05979320Courtesy of NISSAN NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals