LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2013 >> FX37 Base, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Front Axle (AWD)) >> Removal And Installation >> Front Wheel Hub And Knuckle >> Inspection >> Inspection After Installation

Inspection After Installation

WARNING: This page is about a different variant/trim than selected.
  1. Check wheel sensor harness for proper connection. Refer to "FRONT WHEEL SENSOR: EXPLODED VIEW ".
  2. Check the wheel alignment. Refer to "INSPECTION ".
  3. Adjust neutral position of steering angle sensor. Refer to "ADJUSTMENT OF STEERING ANGLE SENSOR NEUTRAL POSITION: SPECIAL REPAIR REQUIREMENT ".
scientia non olet · About LEMON Manuals