LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2013 >> FX37 Base, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Front Suspension (AWD)) >> Removal And Installation >> Transverse Link >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Remove tires with power tool.
  2. Remove shock absorber. Refer to "EXPLODED VIEW ".
  3. Temporarily install upper link and steering knuckle. Refer to "EXPLODED VIEW ".
  4. Remove front cross bar.
  5. Remove transverse link from steering knuckle.
  6. Set suitable jack under transverse link.
  7. Remove transverse link and stopper bushings.
    NOTE: If removing transverse link mounting bolt (front side) is difficult, rotating steering wheel and remove steering outer socket. Refer to "EXPLODED VIEW ".
scientia non olet · About LEMON Manuals