LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2013 >> FX37 Base, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Front Suspension (AWD)) >> Removal And Installation >> Transverse Link >> Inspection >> Inspection After Installation

Inspection After Installation

WARNING: This page is about a different variant/trim than selected.
  1. Check shock absorber actuator harness connector for proper connection (with Continuous Damping Control).
  2. Check wheel sensor harness for proper connection. Refer to "FRONT WHEEL SENSOR: EXPLODED VIEW ".
  3. Check wheel alignment. Refer to "INSPECTION ".
scientia non olet · About LEMON Manuals