LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2013 >> FX37 Base, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Front Suspension (AWD)) >> Removal And Installation >> Front Stabilizer >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Remove under cover.
  2. Remove stabilizer connecting rod with power tool.
    CAUTION: Apply a matching mark to identify the installation position.
  3. Remove stabilizer clamp and stabilizer bushing.
  4. Remove stabilizer bar.
scientia non olet · About LEMON Manuals