Check Disc To Pulley Clearance

WARNING: This page is about a different car, the 2013 Infiniti FX50. However, it is still accessible from the selected car via links, so may be relevant.

Check the clearance (B) between pulley assembly (1) and clutch disc (2) along the entire periphery with a feeler gauge (A).

Clearance: Refer to "COMPRESSOR ".

Fig 1: Checking Pulley Assembly And Clutch Disc Clearance Using Feeler Gauge

Courtesy of NISSAN NORTH AMERICA, INC.

CAUTION: Replace compressor if specified clearance is not obtained, replace adjusting spacer and readjust.