Lubricant Adjusting Procedure for Components Replacement Except Compressor
WARNING: This page is about a different car, the 2013 Infiniti FX50. However, it is still accessible from the selected car via links, so may be relevant.
Add the correct amount of lubricant to the system after replacing any of the following major components. Amount of lubricant to be added:
| Replaced parts | Lubricant to be added to system | Remarks | ||
|---|---|---|---|---|
| Amount of lubricant m l (US fl oz, Imp fl oz) | ||||
| Evaporator | 75 (2.5, 2.6) | - | ||
| Condenser | 35 (1.2, 1.2) | - | ||
| Liquid tank | 10 (0.3, 0.4) | - | ||
| In case of refrigerant leakage | 30 (1.0, 1.1) | Large leakage | ||
| - | Small leakage (1) | |||
|
||||