Removal and Installation: Installation

WARNING: This page is about a different car, the 2013 Infiniti FX50. However, it is still accessible from the selected car via links, so may be relevant.

Note the following, and install in the reverse order of removal.

CAUTION:

When installing A/T air breather hose, be careful not to be crushed or blocked by folding or bending the hose.
When inserting A/T air breather hose to the air breather tube (for A/T) (1), be sure to insert it fully until its end reaches the spool (A) portion.

Fig 1: Locating Air Breather Tube And Spool Portion
Courtesy of NISSAN NORTH AMERICA, INC.
Install A/T air breather hose to air breather tube (for A/T) so that the paint mark is facing upward.
Ensure clips are securely installed to brackets when installing air breather hose to brackets.