Component Inspection (Manual Mode Switch)
WARNING: This page is about a different car, the 2013 Infiniti FX50. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK MANUAL MODE SWITCH
Check continuity between A/T shift selector connector terminals.
A/T shift selector connector Condition Continuity Connector Terminal M137 1 4 Selector lever is shifted to manual shift gate side Existed Other than the above Not existed 2 Selector lever is shifted to - side Existed Other than the above Not existed 3 Selector lever is shifted to + side Existed Other than the above Not existed 5 Selector lever is shifted to manual shift gate side Not existed Other than the above Existed Is the inspection result normal?
YES: INSPECTION END
NO: Replace A/T shift selector assembly. Refer to "EXPLODED VIEW ".