Removal and Installation: Installation

WARNING: This page is about a different car, the 2013 Infiniti FX50. However, it is still accessible from the selected car via links, so may be relevant.

Note the following items, and install in the reverse order of removal.

Check that no foreign objects are interfering with the installation planes of oil filter and oil pan (upper).
Align cutout (A) on oil cooler (1) with protrusion (B) on oil pan (upper) side, and tighten connector bolt.

Fig 1: Locating Cutout On Oil Cooler, Protrusion On Oil Filter Bracket And Bolt

Courtesy of NISSAN NORTH AMERICA, INC.