LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2013 >> FX37 Base, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (Engine Lubrication System) >> Removal And Installation >> Oil Cooler >> Inspection >> Inspection After Installation

Inspection After Installation

WARNING: This page is about a different car, the 2013 Infiniti FX50. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check the engine oil level and the engine coolant level and add engine oil and engine coolant. Refer to "INSPECTION " and "INSPECTION ".
  2. Start the engine, and check there is no leaks of engine oil or engine coolant.
  3. Stop the engine and wait for 15 minutes.
  4. Check the engine oil level and the engine coolant level again. Refer to "INSPECTION " and "INSPECTION ".
scientia non olet · About LEMON Manuals