LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2013 >> FX37 Base, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (Engine Cooling System) >> Removal And Installation >> Water Inlet And Thermostat Assembly >> Removal and Installation >> Installation >> Notes

Removal and Installation: Installation: Notes

WARNING: This page is about a different car, the 2013 Infiniti FX50. However, it is still accessible from the selected car via links, so may be relevant.

Note the following, and install in the reverse order of removal.

CAUTION:
  • Do not reuse O-rings.
  • Be careful not to spill engine coolant over engine room. Use rag to absorb engine coolant.
scientia non olet · About LEMON Manuals