LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2013 >> FX37 Base, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (Engine Cooling System) >> Removal And Installation >> Cooling Fan >> Disassembly and Assembly >> Disassembly

Disassembly and Assembly: Disassembly

WARNING: This page is about a different car, the 2013 Infiniti FX50. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect harness connector from cooling fan control modules.
  2. Remove cooling fan control modules from cooling fan assembly.
    CAUTION: Handle carefully to avoid dropping and impact.
  3. Remove cooling fan mounting nuts, and then remove the cooling fan (RH and LH).
  4. Remove fan motors (RH and LH).
scientia non olet · About LEMON Manuals