Component Inspection (VVEL ACTUATOR MOTOR)

WARNING: This page is about a different car, the 2013 Infiniti FX50. However, it is still accessible from the selected car via links, so may be relevant.

CHECK VVEL ACTUATOR MOTOR

Turn ignition switch OFF.
Disconnect VVEL actuator motor harness connector.

Check resistance between VVEL actuator motor terminals as per the following.

VVEL actuator motor	Resistance
Terminal	Resistance
1 and 2	16 Ω or less

Is the inspection result normal?

YES: INSPECTION END

NO: GO TO 2.

REPLACE VVEL ACTUATOR SUB ASSEMBLY
1. Replace VVEL actuator sub assembly.
2. Perform "SPECIAL REPAIR REQUIREMENT ".
  : INSPECTION END