DTC P0196: EOT Sensor: Description

WARNING: This page is about a different car, the 2013 Infiniti FX50. However, it is still accessible from the selected car via links, so may be relevant.

The engine oil temperature sensor is used to detect the engine oil temperature. The sensor modifies a voltage signal from the ECM. The modified signal returns to the ECM as the engine oil temperature input. The sensor uses a thermistor which is sensitive to the change in temperature. The electrical resistance of the thermistor decreases as temperature increases.

Fig 1: Identifying EOT Sensor, Gasket And Terminal

Courtesy of NISSAN NORTH AMERICA, INC.

VOLTAGE AND RESISTANCE REFERENCE DATA

Engine oil temperature [°C (°F)]

Voltage⁽¹⁾ (V)

Resistance (kΩ)

-10 (14)

4.4

7.0 - 11.4

20 (68)

3.5

2.1 - 2.9

50 (122)

2.2

0.68 - 1.00

90 (194)

0.9

0.236 - 0.260

110 (230)

0.6

0.143 - 0.153

⁽¹⁾	These data are reference values and are measured between ECM terminals 39 (Engine oil temperature sensor) and 34 (Sensor ground).

Fig 2: Engine Oil Temperature Sensor Resistance Versus Temperature Graph

Courtesy of NISSAN NORTH AMERICA, INC.