LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2013 >> FX37 Base, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (Engine Mechanical) >> Unit Removal And Installation >> Engine Assembly >> Removal and Installation >> Removal >> Vehicle Inside

Vehicle Inside

WARNING: This page is about a different car, the 2013 Infiniti FX50. However, it is still accessible from the selected car via links, so may be relevant.

Follow the procedure below to disconnect engine room harness connectors at passenger room side, and temporarily secure them on engine.

  1. Remove glove box assembly and instrument assist lower panel. Refer to "EXPLODED VIEW ".
  2. Disconnect engine room harness connectors at unit sides and other locations.
  3. Disengage intermediate fixing point. Pull out engine room harnesses to engine room side, and temporarily secure them on engine.
    CAUTION:
    • When pulling out harnesses, take care not to damage harnesses and connectors.
    • After temporarily securing, cover connectors with vinyl or similar material to protect against adhesion of foreign materials.
scientia non olet · About LEMON Manuals