LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2013 >> FX37 Base, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (Engine Mechanical) >> Unit Removal And Installation >> Engine Assembly >> Removal and Installation >> Removal >> Engine Room LH

Engine Room LH

WARNING: This page is about a different car, the 2013 Infiniti FX50. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect heater hose at engine side, and fit a plug onto hose end to prevent engine coolant leakage.
  2. Disconnect A/C piping from A/C compressor, and temporarily fasten it on vehicle with a rope. Refer to "EXPLODED VIEW ".
  3. Disconnect vacuum hose from brake booster. Refer to "EXPLODED VIEW ".
  4. Disconnect ground cable.