LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2013 >> FX37 Base, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (Engine Mechanical) >> Unit Disassembly And Assembly >> Oil Pan (Upper) >> Inspection >> Inspection After Assembly

Inspection After Assembly

WARNING: This page is about a different car, the 2013 Infiniti FX50. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check the engine oil level and adjust engine oil. Refer to "INSPECTION ".
  2. Start engine, and check there is no leakage of engine oil.
  3. Stop engine and wait for 15 minutes.
  4. Check the engine oil level again. Refer to "INSPECTION ".
scientia non olet · About LEMON Manuals