LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2013 >> FX37 Base, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (Engine Mechanical) >> Unit Disassembly And Assembly >> How To Select Piston And Bearing >> Piston >> When New Cylinder Block Is Used

When New Cylinder Block Is Used

WARNING: This page is about a different car, the 2013 Infiniti FX50. However, it is still accessible from the selected car via links, so may be relevant.

Check the cylinder bore grade ("1", "2" or "3") on rear side of cylinder block, and select piston of the same grade.

Fig 1: Locating Housing Grade And Bore Grade On Cylinder Block
G09000417Courtesy of NISSAN NORTH AMERICA, INC.
NOTE: Piston is available with piston pin as a set for the service part.