Connecting Rod Big End Diameter

WARNING: This page is about a different car, the 2013 Infiniti FX50. However, it is still accessible from the selected car via links, so may be relevant.

Install connecting rod bearing cap without installing connecting rod bearing, and tighten connecting rod bolts to the specified torque. Refer to "DISASSEMBLY AND ASSEMBLY " for the tightening procedure.

Fig 1: Identifying Connecting Rod Big End Diameter
Courtesy of NISSAN NORTH AMERICA, INC.
Measure the inner diameter of connecting rod big end with an inside micrometer.
Standard: Refer to "CYLINDER BLOCK ".
If out of the standard, replace connecting rod assembly.