LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2013 >> FX37 Base, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (Engine Mechanical) >> Removal And Installation >> Oil Seal >> Rear Oil Seal >> REAR OIL SEAL: Removal and Installation >> Removal

REAR OIL SEAL: Removal and Installation: Removal

WARNING: This page is about a different car, the 2013 Infiniti FX50. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove transmission assembly. Refer to "EXPLODED VIEW ".
  2. Remove drive plate. Refer to "EXPLODED VIEW ".
  3. Remove rear oil seal with a suitable tool.
    CAUTION: Be careful not to damage crankshaft and cylinder block.
    Fig 1: Removing Rear Oil Seal Using Suitable Tool
    G09000227Courtesy of NISSAN NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals