LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2013 >> FX37 Base, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (Engine Mechanical) >> Removal And Installation >> Engine Room Cover >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2013 Infiniti FX50. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Never damage or scratch engine cover when installing or removing.
  1. Remove clip, and remove engine room cover (RH and LH).
  2. Remove engine cover as per the following:
    • Front side: Lift and remove fit.
    • Rear side: Pull out to forward and remove fit.
  3. Remove battery cover and brake master cylinder cover, if necessary.
  4. Remove air duct (inlet). Refer to "EXPLODED VIEW ".
scientia non olet · About LEMON Manuals