LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2013 >> FX37 Base, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (Engine Mechanical) >> Removal And Installation >> Drive Belt Auto TENSIONER And Idler Pulley >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2013 Infiniti FX50. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: The complete drive belt auto-tensioner must be replaced as a unit, including the pulley.
  1. Remove drive belts. Refer to "EXPLODED VIEW ".
    • Keep auto-tensioner pulley arm locked after drive belt is removed.
  2. Remove drive belt auto-tensioners.
    • Keep auto-tensioner pulley arm locked to install or remove auto-tensioner.
      CAUTION: Never loosen the hexagonal part in center of drive belt auto tensioner pulley (Never turn it clockwise). If turned clockwise, the complete drive belt auto tensioner must be replaced as a unit, including the pulley.
  3. Remove idler pulley.
scientia non olet · About LEMON Manuals