LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2013 >> FX37 Base, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (Engine Mechanical) >> Removal And Installation >> Air Cleaner And Air Duct >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2013 Infiniti FX50. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove engine cover and engine room cover (RH and LH). Refer to "EXPLODED VIEW ".
  2. Remove air duct (inlet).
  3. Disconnect mass air flow sensor harness connector.
  4. Disconnect PCV hose.
  5. Remove air cleaner case & mass air flow sensor assembly and air duct by disconnecting their joints.
    • Add matching marks, if necessary for easier installation.
  6. Remove mass air flow sensor from air cleaner case, if necessary.
    CAUTION: Handle mass air flow sensor according to the following instructions.
    • Never impact mass air flow sensor.
    • Never disassemble mass air flow sensor.
    • Never touch mass air flow sensor.
scientia non olet · About LEMON Manuals