Fail-Safe P: Fail-Safe
Combination meter performs fail-safe operation when unified meter and A/C amp. communication is malfunction.
Solution for communication error between the unified meter and A/C amp. and combination meter.
| Function | Specifications | |
|---|---|---|
| Speedometer | Reset to zero by suspending communication. | |
| Tachometer | ||
| Fuel gauge | ||
| Engine coolant temperature gauge | ||
| Illumination control | When suspending communication, change to nighttime mode. | |
| Information display | The display turns off by suspending communication. | |
| Buzzer | The buzzer turns off by suspending communication. | |
| Warning lamp/indicator lamp | ABS warning lamp | The lamp turns on by suspending communication. |
| VDC OFF indicator lamp | ||
| Brake warning lamp | ||
| RAS warning lamp | ||
| CRUISE warning lamp | ||
| IBA OFF indicator lamp | ||
| Malfunction indicator lamp | ||
| High beam indicator | The lamp turns off by suspending communication. | |
| Turn signal indicator lamp | ||
| Tail lamp indicator lamp | ||
| Oil pressure warning lamp | ||
| A/T CHECK warning lamp | ||
| VDC warning lamp | ||
| AWD warning lamp | ||
| Low tire pressure warning lamp | ||
| Key warning lamp | ||
| AFS OFF indicator lamp | ||
| Lane departure warning lamp | ||
| LDP ON indicator lamp | ||
| Sports mode indicator lamp | ||
| Master warning lamp | ||