LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2013 >> EX37 Base, RWD >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Door & Lock >> DTC/Circuit Diagnosis >> Door Switch >> Component Inspection

Component Inspection

  1. CHECK DOOR SWITCH 
    1. Turn ignition switch OFF.
    2. Disconnect door switch connector.
    3. Check door switch terminals.
      Door switch Condition Continuity
      Terminal
      Each door 2 Ground part of door switch Door switch Pressed Not existed
      Released Existed
      Back door 3 4 Pressed Not existed
      Released Existed

      Is the inspection result normal? 

      YES: INSPECTION END

      NO-1: Replace malfunction door switch. Refer to "REMOVAL AND INSTALLATION ".

      NO-2: Replace back door lock assembly. Refer to "REMOVAL AND INSTALLATION ".

scientia non olet · About LEMON Manuals