Physical Values

Terminal No. (Wire color)		Description		Condition		Value (Approx.)
+	-	Signal name	Input/Output	Condition		Value (Approx.)
1 (R)	5 (G)	AC 120 V output	Output	Ignition switch ON	When AC 120 V outlet main switch OFF	0 V
					When AC 120 V outlet main switch ON (When using circuit tester)	AC 120 V
					When AC 120 V outlet main switch ON (When using oscilloscope)	Reference value Courtesy of NISSAN NORTH AMERICA, INC. AC 120 V
4 (G/R)	Ground	Battery power supply	Input	Ignition switch OFF		Battery power supply
5 (G)	1 (R)	AC 120 V output	Output	Ignition switch ON	When AC 120 V outlet main switch OFF	0 V
					When AC 120 V outlet main switch ON (When using circuit tester)	AC 120 V
					When AC 120 V outlet main switch ON (When using oscilloscope)	Reference value Courtesy of NISSAN NORTH AMERICA, INC. AC 120 V
6 (W)	Ground	AC 120 V outlet main switch	Input	Ignition switch ON	When AC 120 V outlet main switch OFF	0 V
6 (W)		AC 120 V outlet main switch	Input	Ignition switch ON	When AC 120 V outlet main switch ON	12 V
7 (O)		AC 120 V outlet main switch indicator	Output	Ignition switch ON	When AC 120 V outlet main switch OFF	0 V
7 (O)		AC 120 V outlet main switch indicator	Output	Ignition switch ON	When AC 120 V outlet main switch ON	5.2 V
8 (G/Y)		Ground	-	Ignition switch ON		0 V

CAUTION:

To measure AC 120 V output signal, always use the circuit tester or oscilloscope AC range. Never allow the probes to contact each other.
Because of modified sine wave output of the AC 120 V output signal, voltage cannot be measured accurately without using a circuit tester that can measure true RMS (root mean square).