Component Inspection

REMOVE FUEL LEVEL SENSOR UNIT
Remove the fuel level sensor unit. Refer to "REMOVAL AND INSTALLATION ".

: GO TO 2.

CHECK FUEL LEVEL SENSOR UNIT

Check the resistance between fuel level sensor unit and fuel pump.

Terminals

Condition

Resistance (Ω) (Approx.)

Height [mm (in)]

Fuel level sensor unit

Full⁽¹⁾ (A)

46.0

280.7 (11.05)

Empty⁽¹⁾ (B)

283.0

29.4 (1.157)

⁽¹⁾	When float rod is contact with stopper.

Fig 1: Checking Fuel Level Sensor Unit

Courtesy of NISSAN NORTH AMERICA, INC.

Is inspection result OK?

YES: INSPECTION END

NO: Replace fuel level sensor unit and fuel pump. Refer to "REMOVAL AND INSTALLATION ".