Component Function Check

CHECK COMBINATION METER OUTPUT SIGNAL

Select the "Data Monitor" for the "METER/M&A" and compare the "FUEL METER" monitor value with the fuel gauge reading on the combination meter.

Fuel gauge indication position	Reference value of data monitor [L]
1	Approx. 101.8
3/4	Approx. 77.3
1/2	Approx. 52.3
1/4	Approx. 27.3
0	Approx. 2.3

Does monitor value match fuel gauge reading?

YES: INSPECTION END

NO: Replace combination meter. Refer to "REMOVAL AND INSTALLATION ".