DTC Index
| Display contents of CONSULT | Diagnostic item is detected when... |
|---|---|
| CAN COMM CIRCUIT [U1000] "DIAGNOSIS PROCEDURE " |
When combination meter is not transmitting or receiving CAN communication signal for 2 seconds or more. |
| CONTROL UNIT (CAN) [U1010] "DIAGNOSIS PROCEDURE " |
When detecting error during the initial diagnosis of the CAN controller of combination meter. |
| VEHICLE SPEED [B2205] "DIAGNOSIS PROCEDURE " |
The abnormal vehicle speed signal is input from the ABS actuator and electric unit (control unit) for 2 seconds or more. |
| ENGINE SPEED [B2267] "DIAGNOSIS PROCEDURE " |
If ECM continuously transmits abnormal engine speed signals for 2 seconds or more. |
| WATER TEMP [B2268] "DIAGNOSIS PROCEDURE " |
If ECM continuously transmits abnormal engine coolant temperature signals for 60 seconds or more. |